引用本文:苑希民,李长跃,田福昌,王丽娜.多源洪水耦合模型在防洪保护区洪水分析中的应用[J].水利水运工程学报,2016,(5):16-22
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 1137次   下载 608 本文二维码信息
码上扫一扫!
分享到: 微信 更多
多源洪水耦合模型在防洪保护区洪水分析中的应用
苑希民1, 李长跃1, 田福昌2, 王丽娜1
1.天津大学水利工程仿真与安全国家重点实验室,天津;2.天津大学前沿技术研究院有限公司,天津
摘要:
针对防洪保护区单一洪水风险分析的不足,以一、二维非恒定流基本控制方程为理论基础,采用有限体积法对网格进行离散求解,建立溃堤洪水和暴雨多源洪水耦合的数学模型。在一、二维模型的链接处选用堰流公式实现河槽与保护区水流的实时交互,借助干湿水深理论对模型进行优化,利用遥感影像解译处理保护区内复杂地形条件下糙率对洪水演进的影响,概化处理区域内道路和过水涵洞对洪水的阻水或导水作用,并利用历史实测洪水资料进行模型验证。将验证后的模型应用于淮河干流凤台段防洪保护区多源洪水运动耦合模拟,分析了单一洪水与多源洪水对防洪保护区的损失比较结果,说明该区域受暴雨内涝影响较为严重。
关键词:  防洪保护区  多源洪水  耦合模型  干湿水深  糙率分区
DOI:
分类号:TV122; TV87
基金项目:国家自然科学基金资助项目(51209158);高等学校学科创新引智计划资助项目(B14012)
Application of multi-source flood coupling model to flood analysis of flood protection zone
YUAN Xi-min1, LI Chang-yue1, TIAN Fu-chang2, WANG Li-na1
1.State Key Laboratory of Hydraulic Engineering Simulation and Safety, Tianjin University, Tianjin;2.Frontier Technology Research Institute, Tianjin University, Tianjin
Abstract:
Aiming at the shortcomings of the single flood risk analysis in the flood protection zone, in this paper the one-dimensional and two-dimensional unsteady flow basic control equations are taken as a theoretical base for analysis of flood risk. In order to solve the discrete grid problem, the finite volume method (FVM) is used for solving discrete grids. A multi-source coupling mathematical model for levee-breach flood and rainstorm has been established at the same time. The 1D and 2D models are jointed through a weir flow equation to calculate the real-time interaction between the river and the flood protection zone. It is optimized by dry depth and wet depth theories for the sake of making faster and better results. And this model has also utilized a remote sensing image interpretation method to deal with the complicated roughness having important impacts on the flood routing. And a generalized method is used to deal with the roads and water culverts which prevent or guide the flowing of water in the flood protection zone. This model is tested by historically measured flood data, which are the basic requirements in actual engineering simulation, and then the verified model is applied to simulate the multi-source flood occurring in the flood protection zone at Fengtai reach. Analysis of the big difference between the serious damages caused by a single flood and a multi-source flood is carried out. The research findings are of great significance in analyzing the multi-source flood and simulating flood motion coupling. And researchers can use the analysis results to make risk evaluation of the flood in the research area and also in some similar flood control protection areas.
Key words:  flood protection zone  multi-source flood  coupling model  dry depth and wet depth  roughness partition
手机扫一扫看