引用本文:李同春,厉丹丹,王志强.基于有限元响应面法的重力坝抗拉可靠度分析[J].水利水运工程学报,2009,(4):
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 1047次   下载 748  
分享到: 微信 更多
基于有限元响应面法的重力坝抗拉可靠度分析
李同春,厉丹丹,王志强
河海大学,水利水电工程学院,江苏,南京,210098
摘要:
采用有限元方法计算坝体内的应力,以可能的拉应力范围作为作用效应,容许的拉应力范围作为抗力,建立了与重力坝设计规范中有限元分析结果相对应的抗拉极限状态方程.由于此极限状态方程为隐式,故采用一阶响应面法求解可靠度,并运用正交试验设计方法减少有限元分析次数.本文以龙滩碾压混凝土重力坝为例,给出了实例计算分析结果.
关键词:  重力坝  有限元  抗拉可靠度  响应面法
DOI:
分类号:TV642.2
基金项目:国家自然科学基金资助项目
Tensile reliability analysis of gravity dams by FEM response surface method
LI Tong-chun,LI Dan-dan,WANG Zhi-qiang
Abstract:
In the paper, the FEM is used to obtain the dam stress, and the limit state equation of tensile reliability for gravity dams is established with the possible tensile stress distribution width being set as action effect and the allowable tensile stress distribution width being set as resistance. This limit state is implicit. The linear response surface method is applied and the orthogonal test design method is used to reduce the number of finite element analysis. The Longtan RCC gravity dam is taken as an example and the analysis results are also given.
Key words:  gravity dam  finite element  tensile reliability  response surface method
手机扫一扫看