富春江七里泷航道第二通道工程船闸输水系统布置

金国强; 宣国祥

引用本文:	金国强,宣国祥.富春江七里泷航道第二通道工程船闸输水系统布置[J].水利水运工程学报,2007,(1):47-52

【打印本页】【HTML】【下载PDF全文】【查看/发表评论】【EndNote】【RefMan】【BibTex】

←前一篇|后一篇→

过刊浏览高级检索

本文已被：浏览 733次下载 720次	码上扫一扫！
分享到：微信更多字体:加大+\|默认\|缩小-
富春江七里泷航道第二通道工程船闸输水系统布置
金国强¹,宣国祥²
1. 浙江省交通规划设计研究院,浙江,杭州,310006 2. 南京水利科学研究院,江苏,南京,210029

摘要:

根据富春江七里泷航道第二通道工程船闸及其上游通航隧道总体布置的特点，按照《船闸输水系统设计规范》的要求，确定了船闸的输水系统型式，并计算了输水阀门处廊道断面的面积；推荐了通航船闸输水系统的布置及关键尺寸．

关键词: 输水系统廊道断面面积水力计算船闸

DOI：

分类号:U641.32

基金项目:

Layout of filling and emptying system of the second line shiplock of Qililong Sea Route on Fuchun River

JIN Guo-qiang¹,XUAN Guo-xiang²

Abstract:

According to the Design Code for Filling and Emptying System of Shiplocks and the layout characteristics of the second line of Qililong Sea Route on Fuchun River and the upstream navigation tunnel, the type of the filling and emptying system of shiplocks is determined, the area of the culvert transect at the valve is calculated, and the layout type and key size of the filling and emptying system are recommended.

Key words: filling and emptying system area of culvert transect hydraulic calculation shiplock