引用本文:刘海祥,洪晓林,陆采荣.外贴钢板加固钢筋混凝土梁有限元分析[J].水利水运工程学报,2003,(3):27-31
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 879次   下载 0 本文二维码信息
码上扫一扫!
分享到: 微信 更多
外贴钢板加固钢筋混凝土梁有限元分析
刘海祥,洪晓林,陆采荣
南京水利科学研究院,江苏南京,210029
摘要:
对外贴钢板加固钢筋混凝土梁分别建立了钢筋混凝土、胶结层和钢板三个力学模型,即采用相应的材料本构关系和不同的有限单元形式,分析了加固梁的整体性能及胶结层的受力情况。结果表明,加固钢板沿梁长度向的两端部切向应力较大;胶结层的厚度对胶结层的切向应力和加固梁的整体性能影响均较小。
关键词:  钢筋混凝土 梁 钢板 胶结层 加固 有限单元法 力学模型
DOI:
分类号:TU375.1
基金项目:
Finite element analyses of reinforcement concrete beams bonded with plate
LIU Hai-xiang,HONG Xiao-lin,LU Cai-rong
Abstract:
The mechanical models for reinforced concrete (RC) , cementation layer and steel plate of externally bonded RC beams are set up by using corresponding constitutive models and different types of finite elements. The integral performance of the beam and stress of the cementation layer is analyzed. It can be seen that the stress is comparatively great at both ends of the plate along the beam's length, while the thickness of the cementation layer has a little influence on the shear stress of the cementation layer and the integral performance of the beam.
Key words:  reinforced concrete beam,steel plate,cementation layer,improvement,finite element method
手机扫一扫看