引用本文:刘小兵,梁柱,程良骏.高浓度固液混合流的湍流模型[J].水利水运工程学报,1996,(1):
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 678次   下载 0  
分享到: 微信 更多
高浓度固液混合流的湍流模型
刘小兵,梁柱,程良骏
四川工业学院,华中理工大学
摘要:
建立了高浓度固液混合流的湍流模型,分析了混合流的应力(包括颗粒碰撞应力、粘性应力、湍流应力及Coulombic摩擦应力)。根据高浓度混合流中颗粒的受力,得出了颗粒运动的力平衡方程。由于引入颗粒碰撞应力和Coulombic摩擦应力,本模型较其它模型更适合具有高浓度和大颗粒的流场。利用本模型模拟的高浓度含沙水流在水平管道中的流动特性,其数值结果与前人所做的实验结果较一致。
关键词:  高浓度,固液混合流,湍流模型
DOI:
分类号:TV131.21
基金项目:国家教委博士点基金
Turbulence model for dense solid-liquid mixture flow
Liu Xiaobing
Abstract:
The turbulence model for dense solid-liquid mixture now is presented.In this model,the stresses for this mixture flow are analysed in detail, including particle impact stress,viscous interactive stress on particles,turbulent stress and Coulombic friction stress. Based on forces on particles, force equilibrium equation (or Lagrangian motion equation of particles)is obtained. Because of introducing particle impact stress and Coulombic friction stress,this model is more suitable for the nows with high concentration and large size particle than the others. Using this model, dense slurry flows in horizontal pipes are modeled.The numerical predictions show good agreement with the experiments.
Key words:  Turbulence model,high concentration,solid - liquid mixture now,
手机扫一扫看